Dronetag Beacon is the bare minimum solution for Direct / Broadcast Remote via Bluetooth 4 and 5. It ensures that your drone is detectable to all air traffic participants and allows you to track the drone in real-time. It may be attached to any drone regardless of its manufacturer and makes you compliant with new EU and US regulations.
To enhance the signal strength and broadcasting range of the device, you can buy the following accessory:
Direct / Broadcast Remote Identification
New regulations are forcing professional pilots in EU & US regions to make their drones digitally visible. Dronetag created Beacon, the add-on that makes drones instantly compliant with the latest DRI standards. Upgrade your existing drone, without the need to purchase new aircraft.
Slap the Dronetag Beacon on and instantly enhance your drone with DRI capability. The tiny device transmits the drone location via Bluetooth to up to a 3 km (1.86 miles) range.
Compliant with prEN 4709-002 which requires Direct Remote Identification for drones above 250 grams flying below 120 meters in the Specific category.
Compliant with ASTM F3411 which requires Broadcast Remote ID for all pilots flying out of FAA-recognized identification areas.
As Beacon is only transmitting data via Bluetooth, it is usable anywhere in the world. All countries using ASD-STAN or ASTM standard are supported. Check your local rules.
Flying in the EU or US region and need advanced Network Remote Identification? Check Dronetag Mini
16 Grams Packed with Technology
With the size of 2 chocolate bar squares (16 g / 0.56 oz) Beacon swing opens the door to the digital experience for drones of all sizes.
Fit the Beacon to nanoweight drone or large UAV. Unparalleled up to 16 hours of battery life gives you enough time to accomplish the wildest missions. Reclosable dual lock fastener so strong that you can lift an average drone by it. Worldwide supported Bluetooth technology and the finest geolocation standards
AVAILABLE ON ALL DEVICES
Dronetag App allows you to manage your devices, check the airspace zones, plan your flights, inspect airborne drones & flight plans and notify you about any airspace hazards.
Show your drone on flight radar
Slap on this tiny beauty and let your drone fly safe & compliant.
The sturdy 3D printed box packed with technology instantly enhances any drone with a DRI feature.
All Data Snug and Secured
With over-the-air firmware updates and data encryption, your information will be safe and neatly organized in the mobile app.
Instant Direct Remote ID upgrade
Compliant with Direct / Broadcast Remote ID according to the prEN 4709-002 and ASTM F3411 standards.
Unparalleled up to 16 hours of battery life
Or use your drone as the power source for carefree flying without hustling to charge several devices.
Precise sensors onboard
GNSS position estimation, pressure altitude measurement, and motion detection via accelerometer.
Multiple geolocation standards
Receiving signals from GPS, GLONASS, Galileo and SBAS for robust and reliable positioning.
Internal Bluetooth & GNSS antennas
With an option to add external Bluetooth antennas for better signal reception.
Worry-free flight from take-off to landing
Beacon warns other closed-by pilots about potential dangers during take-off, landing, or when free-fall is detected.
MAVlink & DJI A3 support
Professional DJI and Pixhawk flight controllers integration via our EXT port to connect to drone’s flight data.