Reach RS3 – NEW!

$3,307.00 CAD

Multi-band RTK GNSS receiver
with tilt compensation.
Survey grade precision in hard-to-reach spots. Comes with mobile app.

Multi-band base and rover
IMU tilt compensation
LTE modem
Dual-band radio
Tilt compensation:  IMU: 6DOF, RTK
Tilt-compensation accuracy: 2mm + 0.3mm per degree of tilt
GNSS: GPS/QZSS, GLONASS L1, L2; BeiDou B1, B2; Galileo E1, E5
Battery: 18 hrs with tilt compensation: Li-Ion battery, USB-C charging
LTE and Wi-Fi: To connect the device to the internet
Dual-band radio: 868/915 MHz LoRa to receive and transmit corrections.  450 MHz UHF to receive corrections
NTRIP and RTCM3: Supported protocols to send and receive corrections

Package includes

– Reach RS3
– Carrying case with a strap
– LoRa antenna
– USB Type-C cable
– 3-month Survey plan subscription in Emlid Flow

– Comes with a receive-only UHF radio (410-470 MHz & TRIMTALK 450S)

SKU: RCH205 Category:

Description

Accurate results even with large tilt angles

The IMU-based tilt compensation in Reach RS3 enables you to make measurements with up to 60 degrees of tilt while still staying within 20mm of accuracy.
Reach RS3 continuously measures and corrects tilt in real-time to keep you on the target.

Survey and stakeout faster. No need to check the bubble!

Effortless and robust tilt compensation

Calibration-Free

We calibrate each unit individually at the factory, so you can get your Reach RS3 up and running right out of the box.

Immune to magnetic disturbances

Unaffected by magnetic fields, the RS3 provides robust tilt compensation even when working close to metal structures.
Quick initialization
Tilt initialization takes about 20 meters of walking or 10-20 seconds of tilting. Usually ready on the way from the car.

Rapid and Reliable GNSS receiver

Gets a fix in 5 seconds

Reach RS3 gets a centimeter-accurate solution in about 5 seconds. It maintains robust performance even when the sky view is partially obstructed, or the receiver itself is tilted.

GPS/QZSS, GLONASS, BeiDou, and Galileo

L1C/A, L2C, L1OF, L2OF, B1I, B2I, E1B/C, E5b

RINEX logging and PPP support

Record raw data in the RINEX format for post-processing. You can use free PPK software, Emlid Studio, or any other software that supports RINEX. Logs are also compatible with OPUS, AUSPOS, and PPP services, so you can get highly accurate results anywhere in the world.

16 GB storage

160+ days of logging at 1 Hz

Up to 22 hours on 1 charge

Reach RS3 comes equipped with a built-in, industrial-grade battery that can endure up to 22 hours of logging or 18 hours of working with tilt in RTK.

For uninterrupted multi-day operation, simply connect a power bank, just like you would with your mobile phone.

Charging via USB-C

Built-in LTE modem

Insert a SIM card into your Reach RS3 and let it broadcast or receive corrections via NTRIP.

Get corrections from CORS, Reach, or 3rd-party base

NTRIP Base and Rover

Work in RTK with VRS or a single baseline CORS network. You can also connect another GNSS receiver as an NTRIP base using Emlid NTRIP Caster.

Compatibility

Any receiver with RTCM3 support

Dual-band radio

LoRa 868/915 MHz Base and Rover

Perfect for areas with no internet coverage for NTRIP. LoRa is used when connecting Emlid receivers over the radio.

Compatibility

All Emlid receivers with built-in radios

UHF 450 MHz Rover

An option to mix and match RTK receivers within your fleet. You can configure your Reach RS3 to receive corrections from an existing base.

You can also use a high-power external radio on your Reach base and connect with the UHF radio receiver in Reach RS3.

Compatibility

Bases with radios that transmit TRIMTALK 450S

*TRIMTALK is a trademark of Trimble Inc.

Related products

Recent Posts